Tsinfa is a professional supplier & manufacturer of 150 ton hydraulic press machine in China. 150 ton hydraulic press machine has various structures and a wide range of uses. It is suitable for the pressing process of plastic materials, such as sheet metal stretching, bending, flanging, blanking, etc. it can also be engaged in the correction, press fitting, cold extrusion metal parts forming, plastic products and powder products.
Need a quote? You can also fill out our : contact form
Hydraulic press machine operation video 100-3000 ton
.
The machine has independent power mechanism and electrical system, and adopts centralized control, which can realize manual and automatic operation modes, working pressure The pressing speed and stroke range are adjustable, and there are two molding processes of constant pressure and constant stroke for selection. 150 ton hydraulic press machine structure usually has five beam four column deep drawing machine, four beam four column powder forming hydraulic press machine, three beam four column hydraulic press machine, single arm hydraulic press machine, gantry hydraulic press machine, frame hydraulic press machine and other structures.
Why the temperature rise is too high in the actual production of 150 tons hydraulic press?
If 150 tons hydraulic press machine with ejector cylinder, then the main cylinder and ejector cylinder can work at the same time?
It is very common to have an upper cylinder (main cylinder) and a bottom cylinder (ejector cylinder) on a hydraulic press machine. Whether these two cylinders can work at the same time can be seen from the oil circuit of the hydraulic press. It is necessary to make a little modification on the circuit, and pay attention to control when the machine is operated and used. But from the design point of view of the hydraulic press machine, it is not recommended that the upper cylinder and the bottom cylinder work at the same time, because the main purpose of the bottom cylinder (ejection cylinder) design is to complete the ejection of the pressed product when the upper cylinder finishes pressing. If the upper and bottom cylinders work at the same time, it is likely to collide with each other, affecting the normal use of the hydraulic press machine.
