LM6241 Engine Lathe Machine
SPECIFICATIONS
| Model | LM6241(V) | |
| CAPACITY | Max.swing over bed | 410mm |
| Max.swing over cross slide | 255mm | |
| Max.swing over gap | 580mm | |
| Effective length of gap | 190mm | |
| Center Distance | 1000\1500mm | |
| Bed Width | 250mm | |
| HEADSTOCK | Spindle hole | 52mm |
| Spindle nose | ISO-D6 | |
| Spindle taper | MT6 | |
| Spindle speed(Number) | (16steps)45-1800rpm | |
| FEEDS | Longitudinal metric feeds | 17kinds 0.05-1.7mm/rev |
| Longitudinal inch feeds | 17kinds 0.002-0.067inc/rev | |
| Cross metric feeds | 17kinds 0.025-0.85mm/rev | |
| Cross inch feeds | 17kinds 0.001-0.0335inc/rev | |
| Metric threads range | 39kinds 0.2-14mm | |
| Inch threads range | 45kinds 2-72T.P.I | |
| Moudle threads range | 18kinds 0.3-3.5M.P. | |
| Diametral threads range | 21kinds 8-44D.P. | |
| CARRIAGE | Max.travel of top slide | 140mm |
| Max.travel of cross slide | 210mm | |
| Max.size of toolshank | 20*20m2 | |
| TAILSTOCK | Dia.of tailstock sleeve | 50mm |
| Taper of tailstock sleeve | MT4 | |
| Max.travel of tailstock | 120mm | |
| MOTOR | Main drive motor | 3or4KW |
| Coolant pump motor | 90W | |
| PACKING | Center Distance(1000mm) | 205*90*170cm |
| Center Distance(1500mm) | 255*90*170cm | |
| WEIGHT | Center Distance(1000mm) | 1150/1350kg |
| Center Distance(1500mm) | 1350/1600kg | |
STANDARD EQUIPMENT
The main components of manual lathe are: spindle box, feed box, slide box, lathe tool holder, tail frame, light bar, screw and lathe bed.
Spindle box: the main motor power is transferred to the spindle and the feed box through the belt and gear. The change of revolving speed and direction of rotation are realized by different combination of gears.
Feed box: there are gear box in the feed box, which control screw rotation to drive the lathe tool holder.
Slide box: operation of the feed movement of the lathe, rotary motion will be converted to the linear motion of the lathe tool holder.
Lathe Tool holder: cutting tool can be clamped, the tool will be fixed in a certain direction and position when the workpiece is machined.
Screw and light bar: Connection of the feed box and the saddle box, transfer the power and movement from feed box to saddle box, make saddle box to obtain a longitudinal linear motion. Screw is designed to turn a variety of thread, light bar used in the turning of surface of other workpiece.
Lathe bed: the main part of the lathe, other components are installed on the bed.
ACCESSORIES
Standard Accessory
3 &4 Jaw Chuck
Face plate
Longitudinal touch stop
Coolant system
One set tools and tool box
Foot brake
thread-cutting dial
work lamp
Oil gun
Steady rest & follow rest
Dead center and center sleeve
Work lamp
Full-length splash guard
Optional Accessories:
Chuck guard and tool post guard
Digital readout
magneto electrical brake
Quick change tool post( USD type /Europe type)
Taper cutting function
leadscrew cover
Live Center (MT4)
Drill Chuck Set
REQUEST A QUOTE
CONTACT
Opening Hours:
Monday/Sunday
24Hours
+86-15318444939
Sales@tsinfa.com