LT62 Engine Lathe Machine
On hover to room
SPECIFICATIONS
| Model | LT6240 | LT6250 | LT6266 | LT6280 | ||||||
| SpecifiLTtions | LT6240B | LT6250B | LT6266B | LT6280B | ||||||
| LT6250C | LT6266C | LT6280C | ||||||||
| Max .Swing over bed | 400mm | 500mm | 660mm | 800mm | ||||||
| Max .Swing over cross slide | 210mm | 300mm | 400mm | 540mm | ||||||
| Max .Swing over gap | 630mm | 720mm | 880mm | 1020mm | ||||||
| Effective gap length | 210mm | 210mm | 210mm | 210mm | ||||||
| Max .length of work piece | 750/1000/1500/2000/3000/4000mm | |||||||||
| Width of bed | 400mm | |||||||||
| Section of turning tool | 25×25mm | |||||||||
| Spindle | spindle speed | 16-1400rpm(24steps) | ||||||||
| hole through spindle | 52mm 、(80mm)、[105mm] | |||||||||
| spindle taper | No.6(MT6)(Φ90 1:20)[Φ113:20] | |||||||||
| Feed | No. of feed | 64kinds(64 kinds)(for each) | ||||||||
| range of metric threads | (1-192mm)44kinds (44 kinds) | |||||||||
| range of inch threads | (2-24tpi)21kinds (21kinds) | |||||||||
| range of module threads | 0.25-48(39kinds)(module 39 kinds) | |||||||||
| range of diametral pitc threads | 1-96DP(37kinds)(37 kinds) | |||||||||
| Tailstock | Max. tailstock spindle travel | 150mm | ||||||||
| tailstock spindle diameter | 75mm | |||||||||
| taper of tailstock spindle center hole | NO.5 (MT5) | |||||||||
| Main motor | 7.5KW(10HP) | |||||||||
| Packing dimensions | Overall dimensions for 750mm | 2550×1140×1750 | 2550×1140×1750 | 2550×1140×1750 | 2550×1140×1750 | |||||
| （L×W×H mm） | Overall dimensions for 1000mm | 2700×1140×1750 | 2700×1140×1750 | 2700×1140×1750 | 2700×1140×1750 | |||||
| Overall dimensions for 1500mm | 3200×1140×1750 | 3200×1140×1750 | 3200×1140×1750 | 3200×1140×1750 | ||||||
| Overall dimensions for 2000mm | 3700×1140×1750 | 3700×1140×1750 | 3700×1140×1750 | 3700×1140×1750 | ||||||
| Overall dimensions for 2200mm | 4030×1140×1750 | 4030×1140×1750 | 4030×1140×1750 | 4030×1140×1750 | ||||||
| Overall dimensions for 3000mm | 4800×1140×1750 | 4800×1140×1750 | 4800×1140×1750 | 4800×1140×1750 | ||||||
| Overall dimensions for 4000mm | 5680×1140×1700 | 5680×1140×1700 | 5680×1140×1700 | 5680×1140×1700 | ||||||
| Weight(kg) | Length | G.W. N.W. | G.W .N.W. | G.W. N.W. | G.W. N.W. | |||||
| Overall dimensions for 750mm | 2100 1990 | 2170 2060 | 2380 2260 | 2520 2400 | ||||||
| Overall dimensions for 1000mm | 2190 2070 | 2260 2140 | 2570 2450 | 2720 2560 | ||||||
| Overall dimensions for 1500mm | 2350 2220 | 2420 2290 | 2810 2640 | 2980 2800 | ||||||
| Overall dimensions for 2000mm | 2720 2570 | 2790 2640 | 3050 2880 | 3260 3087 | ||||||
| Overall dimensions for 2200mm | 2800 2600 | 2940 2790 | 3390 3180 | 3490 3287 | ||||||
| Overall dimensions for 3000mm | 3300 3200 | 3450 3300 | 3930 3687 | 4220 3887 | ||||||
| Overall dimensions for 4000mm | 3500 3400 | 3750 3600 | 4580 4200 | 4850 4500 | ||||||
STANDARD EQUIPMENT
The main components of manual lathe are: spindle box, feed box, slide box, lathe tool holder, tail frame, light bar, screw and lathe bed.
Spindle box: the main motor power is transferred to the spindle and the feed box through the belt and gear. The change of revolving speed and direction of rotation are realized by different combination of gears.
Feed box: there are gear box in the feed box, which control screw rotation to drive the lathe tool holder.
Slide box: operation of the feed movement of the lathe, rotary motion will be converted to the linear motion of the lathe tool holder.
Lathe Tool holder: cutting tool can be clamped, the tool will be fixed in a certain direction and position when the workpiece is machined.
Screw and light bar: Connection of the feed box and the saddle box, transfer the power and movement from feed box to saddle box, make saddle box to obtain a longitudinal linear motion. Screw is designed to turn a variety of thread, light bar used in the turning of surface of other workpiece.
Lathe bed: the main part of the lathe, other components are installed on the bed.
ACCESSORIES
Standard Accessory
3 &4 Jaw Chuck
Face plate
Longitudinal touch stop
Coolant system
One set tools and tool box
Foot brake
thread-cutting dial
work lamp
Oil gun
Steady rest & follow rest
Dead center and center sleeve
Work lamp
Full-length splash guard
Optional Accessories:
Chuck guard and tool post guard
Digital readout
magneto electrical brake
Quick change tool post( USD type /Europe type)
Taper cutting function
leadscrew cover
Live Center (MT4)
Drill Chuck Set
REQUEST A QUOTE
CONTACT
Opening Hours:
Monday/Sunday
24Hours
+86-15318444939
Sales@tsinfa.com
- 123
- 78
- 34535
- 789
- 123
- 789
- 456
- 345
- 123
- 78
- 567
- 6
- 123
- 789
- 789
- 6
- 456
- 78
- 789
- 7
- 789
- 789
- 78
- 789
Click here to add your own text