Bending pressure peate die figure for press brake:
Afrer the matenial slab thickness and bending inner radius being fixed.please see the table below.
1.It can be seen from the table that the pressure at every metre whenbending materials.
2.The V- groove width(V) of lower die when used for bending.
3.The shortest -length(b) arising from bending.
Note:The following table shows the corresponding V groove width of thedie with general thickness.
Tsinfa is a professional supplier & manufacturer of hydraulic bending machine in China. Hydraulic press brake machine is especially suitable for bending metal sheet.
There are many different kinds of tonnage, 40 ton, 50 ton, 63 ton, 80 ton, 100 ton, 125 ton, 160 ton, 200 ton, 300 ton, 400 ton, 500 ton, 600 ton, 800 ton hydraulic press brake.
●Whole-welded structure.vibration to eliminate sress, with high strength and good rigidity.
●Mechanical stop, steel torslon bar to maintain synchtonization,high precision.
●Electical control.Manual fine-tuning of back gauge and side stroke numerical display.
●Dellecbon compensation unit instaled on the top die.compensation unit for lower die is adopted for the machine.