Nemi fatawa


    Kayan Milling na Duniya XN-26

    A shawagi zuwa daki

    Za'a iya amfani da mashin din biyu don nika a tsaye da nika a kwance, tare da abin da aka makala a ciki, haka nan kuma ana iya nika fuskoki daban-daban na juyawa da ramuka, da dai sauransu. tare da kusurwa da yawa da fuska da yawa ta lokaci guda na riƙewa. Yana da kayan aikin kayan masarufi don masana'antun kera injina, kayan kwalliya, motoci da babura.

                        

    Abubuwan Abubuwan Dama: 200 Set / Sets per Month
    Tashar jiragen ruwa: Qingdao / Shanghai

    KAYAN KWAYOYI

    Musammantawa XN26
    Max.vertical milling dia 125
    Max. a tsaye milling abun yanka dia 25
    Kusurwa a madaidaicin kai ± 360 °
    Girman tebur 1200 × 280
    Tafiya a tebur 650x200x450
    Ram tafiya 200
    Babban motar 2.2
    Nisa daga sanda zuwa tebur 80-500
    Indirƙirar gudu Range 35-1600
    Girman girma 1500X1400X1780
    NW / GW 1210/1400

    MATSAYI NA GARI

    Milling shugaban:
    Shugaban milling ya ƙunshi sassa biyu waɗanda suke digiri 45 a kusurwa. Tsarin kusurwa 45-digiri na iya daidaita daidaitaccen shugabanci na sarrafa kayan aikin inji ya fi karko mafi ilimin kimiyya, mafi dacewa. Man shafawa tare da man shafawa mai dacewa yana da dorewa. Zai iya juyawa da kansa na digiri 360.
    Sashi bangare:
    Dauke tallafi, sarrafawa, zafin rai, kashe magani. Kayan yana ɗaukar 40CR ƙarfi da ƙarfi mai ƙarfi. Amfani da P5-sa Harbin diagonal mai ɗauke da daidaito mai daidaito.

    Watsa:
    Ana sarrafa giyar ne ta hanyar maganin zafi da nika mai kyau. Babban daidaito, karko, ƙarami, yana da saurin sau 12 don biyan buƙatun sarrafa abubuwa daban-daban. Kuma ana iya motsa gearbox gaba da gaba ta yadda za'a iya fadada kewayon kayan aikin inji.

    Sashin gadan jikin jiki:
    Runningangaren da ke gudana na baƙin ƙarfe na ht250-300 babban dogo ne murabba'i wanda ya fi nau'ikan jela ƙarfi da daidaito. Kuma duk suna amfani da maganin kashe kuzari don cimma hrc40-50 tsakanin lalacewa mai jurewa. Hakanan za'a iya amfani dashi daidai da bukatun kwastomomin ƙasashen waje sawa mai jure filastik manna nauyi mai sauƙi da dacewa. Gudun shaft a kwance yawanci har zuwa 200 rpm don biyan bukatun sarrafawa. Ana iya amfani da shi tare da brackets da mai niƙa a kwance don aiwatar da wasu tsagi da sauran hanyoyin aiwatarwa.

    Dunƙule:
    Ingancin niƙa sukurori, kwayoyi don tagulla 10-1.

    Gear:
    nika kaya, farfajiyar hardening jiyya.

    Jagora:
    Yin amfani da raƙuman raƙuman murabba'i, jiyya mai raɗaɗi, ƙarfi mai kauri, mai ɗorewa. Fuskar jagora ta taurara don isa hrc38-42. Thearfin aikin aiki ya kai tsakanin hrc40-50.

    KAYAN HAKA

    Standard Na'urorin haɗi:

    A'a Suna Musammantawa Yawan
    1 Injin inji tare da shugaban yankan duniya mai juyawa 1
    2 Milling Chuck 7:24 ISO40 (4、5、6、8、10、12、14、16) 1 saita
    3 Gwanin soket 5、6、8、10、12 Kowannensu
    4 Takamaiman milling hilt ISO40 / Φ22 Φ27 Kowannensu
    5 Zana mashaya 2
    6 Swannin wuta S22-24 S17-19 Kowannensu
    7 Injin na'ura 160 1
    8 Rewunƙwasa ƙasa M16 4
    9 Goro da wanki M16 Φ16 Kowane 4
    10 Aikin jagora 1
    11 Takaddun cancanta 1
    12 Jerin shiryawa 1

    ZABI Na'urorin haɗi:

    Shugaban raba duniya
    Teburin Rotary
    DRO
    claming kit
    Slotting kai

    Nemi fatawa

    Saduwa

    Awanni Budewa:
    Litinin / Lahadi
    24Awanni

    + 86-15318444939

    Talla @tsinfa.com

    Maganina

    Ba ku da abubuwa a cikin kuɗinku.

    Saduwa

    Awanni Budewa:
    Litinin / Lahadi
    24Awanni

    + 86-15318444939

    Talla @tsinfa.com

    WEBSHOP

    • 100 + Kwararrun ƙwararrun ma'aikata.
    • Farashin Matsakaici
    • 15 + Shekaru na kwarewa
    • Kula da Inganci
    • Isar da Sauri